MR-600T
مواصفات المنتج
- Quick start, 18 seconds warm start typical
- Low power consumption (0.9W typical)
- Wide supply voltages range (9~34VDC)
The AQTIME MR-600T is the integration of a timing GPS receiver and antenna in a compact/weather proof enclosure for time transfer application. It outputs UTC synchronized 1PPS with +/- 1 microseconds tolerance, which is close to an atomic clock in accuracy.
As a time transfer device, the AQTIME MR-600T is capable of operating with even 3(three) satellites after having a fix position with 3 or more satellites previously, so you can get precise time base anywhere on the Earth even under a very harsh environment where only one satellite is available.
شهادة
- UTC synchronized precise time base can be obtain anywhere on the earth at a relatively low cost
- Ultra compact, fully weather-proof, easy to mount
- Quick start, 18 seconds warm start typical
- Continue to output time data with even one satellite tracked
- Wide supply voltages range (9~34VDC)
- Low power consumption (0.9W typical)
Applications:
- Time Stamp Data Logger
- Synchronization of radio base stations for cellular Phone, pagers,…etc.
- Time control of computer terminals connected to network
1 PPS Output:
- Output signal level:
RS232 (std),
RS422(optional)
- Output data format:
NMEA 0183
- Accuracy:
+/- 1 u second
(2DRMS) to UTC
adjustment
تخصيص
| Specifications | Parameter | Description |
|---|---|---|
| General | L1 frequency, C/A code(SPS), 12 Independent tracking channel (GPSP8633 & BBP1202) | |
| Sensitivity | -143 dBm (tracking) | |
| Accuracy | Position | 15m CEP , 5m(waas) |
| Velocity | 0.1 m/sec. 0.05m/s(waas) | |
| Time | +/- 1 μs RMS (static mode) | |
| Acquisition | Cold start | 70 sec. (typical) |
| Warm start | 38 sec. (typical) | |
| Hot start | 8 sec. (typical) | |
| Reacquisition | 100 ms typical (signal reacquisition) | |
| Dynamics | Altitude | 18000m max. |
| Velocity | 500 m/sec. | |
| Vibration | 4G max. | |
| Operation Temperature | -40° C to +85° C | |
| Storage Temperature | -45° C to +90° C | |
| Operating Humidity | 0% to 95% RH, non condensing | |
| Water Resistance | 100% waterproof | |
| Primary Power | 9V ~ 34V DC | |
| Power Consumption | 130mA | |
| Protocol | NMEA-0183 v3.0 baud rate 4800/9600/19200/38400/115200, default 4800 | |
| Signal level | RS-232(standard),USB & RS-422 optional | |
| NMEA Message | GGA, GLL, GSA, GSV, RMC, and VTG | |
| EMI filter | Rejects power line interference | |
| Power cable | UL 2464 , 15M | |
| Enclosure | High impact, corrosion-proof polycarbonate resin | |
| Connector | open | |
| Dimensions | GPS Locator | 112mm(Dia.) × 104 mm(H) |
| Mounting Base | ||
| Weight | 270 grams | |
| Standard Mounting | Concinnity and Solid design | |
| waterproof | IPX7 |
*This specification is subject to change without prior notice
User selectable datum *Pole mount to 1"-14 UNS threaded mast
MR600T 1PPS Specification
- The signal is generated after the MR-600T power on and continues until power down.
- The rising edge of the signal is synchronized to the start of each GPS second.
- The signal is valid after the initial position fix has been calculated.
- The accuracy of the one-pulse-per-second output is maintained only while the MR600T can compute a valid position fix.
- The default pulse width is 1u second.
- The pulse height is 3V.
- The accuracy is +/- 1usec with respect to the GPS second.
| Power Interface RS232: | |
  |
|
| I/O PIN & CABLE | ||
|---|---|---|
| Connector | Wire | Function |
| PIN1 | White | Receive |
| PIN2 | Green | transmit |
| PIN3 | Yellow | Ground |
| PIN4 | Bare Braid | Earth |
| PIN5 | Blue | 1 PPS |
| PIN6 | Black | Power- |
| PIN7 | Red | Power+ |
RS422 I/O Connection
| Connector | Wire | Function |
|---|---|---|
| PIN1 | White (R+) | Differential input + |
| PIN2 | Green (T+) | Differential output + |
| PIN3 | Yellow (T-) | Differential output - |
| PIN4 | To be detemined(R-) | Differential input - |
| PIN5 | Blue | 1PPS |
| PIN6 | Black ( - ) | Power- |
| PIN7 | Red (+) | Power+ |